Casio PAS400B-5V

Manual de utilizare Casio PAS400B-5V

(1)
  • Operation Guide 2632/2805
    1
    MA0311-EB
    Getting Acquainted
    Congratulations upon your selection of this CASIO watch. To get the most out of your
    purchase, be sure to carefully read this manual and keep it on hand for later reference
    when necessary.
    Important!
    The fishing/hunting time data, sunrise and sunset data, and moon phase indicator
    produced by this watch are all based on calculations that use the watch’s current time,
    date, and Home Site settings. Because of this, you should make sure that the current
    date and time, and your Home Site data are all correct before using such data.
    When fishing or hunting, always take proper precautions to ensure your own
    personal safety and the personal safety of others around you.
    Note that the fishing/hunting time data, sunrise and sunset data, and moon phase
    indicator are all based on calculated values. They are provided only for reference
    purposes.
    See the “Timekeeping” section of this manual for information about setting the
    current time and date, and about specifying your Home Site.
    General Guide
    Press D to change from mode to mode.
    In any mode, press L to illuminate the display.
    About This Manual
    The operational procedures for Modules 2632 and 2805
    are identical. All of the illustrations in this manual show
    Module 2632.
    Button operations are indicated using the letters shown
    in the illustration.
    Each section of this manual provides you with the
    information you need to perform operations in each
    mode. Further details and technical information can be
    found in the “Reference” section.
    Module 2805
    (Light)
    Module 2632
    In addition to the modes shown here, this watch also has a Time Memo feature.
    Timekeeping
    Use the Timekeeping Mode to set and view the current
    time, date, and your Home Site.
    The Moon phase indicator shows the current Moon
    phase in accordance with the current date as kept in the
    Timekeeping Mode.
    The graphic area that runs around the periphery of the
    display indicates fishing/hunting times, as well as
    daylight and nighttime hours.
    Important!
    Be sure to correctly configure the current time and date,
    and your Home Site data (data for the site where you use
    the watch) before using the functions of this watch.
    See “Home Site Data” about specifying your Home Site.
    Recall Mode Alarm Mode Stopwatch Mode
    Timekeeping Mode Fishing/Hunting
    Time Mode
    Sunrise/Sunset Mode
    Press
    D.
    Day of week
    Year Month – Day
    Hour : Minutes Seconds
    PM indicator
    Graphic area
    Moon phase indicator
    To set the time and date
    1. In the Timekeeping Mode, hold down A until the
    seconds start to flash, which indicates the setting
    screen.
    While the seconds are flashing, press E to reset the
    seconds count to
    00
    .
    2. Press D to move the flashing in the sequence shown
    below to select other settings.
    Seconds Hour
    Minutes
    12/24-Hour
    Format
    Day Year
    Month
    3. While the hour, minutes, year, month, or day setting is flashing, use E (+) and B
    (–) to change it.
    When the 12/24-hour setting is flashing, press E to toggle between 12-hour
    (
    ) and 24-hour ( ) timekeeping.
    4. Press A twice to exit the setting screen.
    The first press of A displays the Home Site GMT differential setting screen.
    Pressing A again exits the setting screen.
    When you exit the setting screen after changing the current time and/or date setting,
    the graphic area around the periphery of the display performs an animated pattern
    to indicate that the watch is performing internal calculations. This process can
    continue for as long as 15 seconds. Wait until the animated pattern stops before
    performing any other button operation.
    The day of the week is automatically displayed in accordance with the date (year,
    month, and day) settings.
    Home Site Data
    Moon phase indicator, fishing/hunting time data, and sunrise and sunset data will not
    be displayed properly unless Home Site data (GMT differential, latitude, and
    longitude) is configured correctly.
    The GMT differential is a value that indicates the time difference between Greenwich
    Mean Time and the time zone where a city is located.
    Note that you must add one hour to the current time setting and the GMT differential
    of your time zone whenever you change to Daylight Saving Time (summer time).
    Subtract one hour when you change back to Standard Time.
    The “Site Data List” provides GMT differential, latitude, and longitude information
    around the world.
    To configure Home Site data
    1. In the Timekeeping Mode, hold down A until the
    seconds start to flash, which indicates the setting
    screen.
    2. Press A again to display the GMT differential setting
    screen.
    3. Use E (+) and B (–) to change it.
    You can specify a value in the range of –11.0 to
    +14.0, in 0.5-hour units.
    4. Press D to display the Latitude/Longitude setting
    screen, and then change the setting.
    Press B to change the latitude value and E to
    change the longitude.
    At first, pressing B or E increases the value. Press
    C to toggle the B and E button operations
    between increase and decrease.
    You can specify latitude in the range of 65°N to 65°S,
    and longitude from 179°W to 180°E, both in 1-degree
    units.
    5. Press A to exit the setting screen.
    When you exit the setting screen after changing the latitude and/or longitude setting,
    the graphic area around the periphery of the display performs an animated pattern
    to indicate that the watch is performing internal calculations. This process can
    continue for as long as 15 seconds. Wait until the animated pattern stops before
    performing any other button operation.
    Graphic Area
    In the Timekeeping Mode, the graphic area can be used to view either a fishing/
    hunting time graph or a daylight graph. Press E to toggle between them.
    Fishing/Hunting Time Graph Daylight Graph
    Level indicator
    0:00 (12:00 AM)
    18:00
    (6:00 PM)
    6:00 AM
    12:00 (12:00 PM)
    The markings along the display’s graphic area show the 24 hours of each day. Each
    graphic area segment represents 30 minutes. The flashing segment of the graphic
    area indicates the current time.
    The fishing/hunting time graph indicates the times when fish or game can be
    expected to be feeding. For more information, see “Using the Fishing/Hunting Time
    Features”.
    The blackened part of the daylight graph indicates nighttime. For more information,
    see “Sunrise/Sunset Mode”.
    Using the Fishing/Hunting Time Features
    Your watch provides you with information about favorable
    fishing/hunting times and other data (Moon phase and
    age) at your Home Site for a particular date. You can even
    configure a fishing/hunting alarm that alerts you when a
    favorable fishing/hunting time has been reached.
    The fishing/hunting times shown by your watch are the
    times when the moon is at its highest point (upper
    transit), lowest point (lower transit), furthest point the
    east (east transit), and furthest point to the west (west
    transit) of your Home Site. These are favorable times for
    fishing and hunting.
    For more details about the fishing/hunting times, see
    “Fishing/Hunting Time Calculation”.
    See “Moon Phase Indicator” for information about the
    Moon phase indicator.
    Latitude
    Longitude
    Press E.
    Moon age
    Date (Year
    Month Day)
    Time (Hour : Minutes)
    Fishing/hunting time graph
    Moon phase indicator
Casio PAS400B-5V

Aveți nevoie de ajutor?

Numărul de întrebări: 0

Aveți o întrebare despre Casio PAS400B-5V sau aveți nevoie de ajutor? Puneți-vă întrebarea aici. Oferiți o descriere clară și cuprinzătoare a problemei și a întrebării dvs.. Cu cât oferiți mai multe detalii pentru problema și întrebarea dvs., cu atât va fi mai ușor pentru ceilalți proprietari Casio PAS400B-5V să răspundă corect la întrebarea dvs..

Consultați aici manualul pentru Casio PAS400B-5V, gratuit. Acest manual se încadrează în categoria Ceasuri sportive și a fost evaluat de 1 persoane cu o notă medie de 5.4. Acest manual este disponibil în următoarele limbi: Engleză. Aveți o întrebare despre Casio PAS400B-5V sau aveți nevoie de ajutor? Puneți întrebarea aici

Specificații Casio PAS400B-5V

General
Brand Casio
Model PAS400B-5V
Produs ceas sportiv
EAN 151903595244, 79767785420
Limbă Engleză
Tipul fișierului PDF
Detalii tehnice
Impermeabil
Contor de timp Pescuit
Rezistent la apă până la 100
Calendar
Mod ceas 12h/24h
Cronometrul
Precizie 15sec/lună
Alte caracteristici
Dimensiuni(LxAxI) 50 x 12.5 x 44
Greutate şi dimensiuni
Greutate 46
Managementul energiei
Tip baterie CR2025

Manualdeinstructiuni.ro

Cauți un manual? Manualdeinstructiuni.ro îți garantează că vei găsi manualul pe care îl cauți rapid. Baza noastră de date conține peste 1 milion de manuale PDF pentru mai mult de 10.000 de mărci. În fiecare zi, adăugăm cele mai noi manuale pentru ca tu să poți găsi mereu produsul pe care îl cauți. Este foarte simplu: doar introdu numele mărcii și tipul produsului în bara de căutare și poți vedea instantaneu manualul dorit online gratuit.

Manualdeinstructiuni.ro

© Copyright 2020 Manualdeinstructiuni.ro. Toate drepturile rezervate.