Clas Ohlson RC123

Manual de utilizare Clas Ohlson RC123

(1)
  • English
    GREAT BRITAIN • customer service
    tel: 08545 300 9799 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk
    3
    4
    5
    2
    1
    Ver. 20130624
    Radio Controlled Alarm Clock
    Art.no 36-5340 Model RC123
    Please read theentire instruction manual before using theproduct and save it
    for future reference. We reserve theright for any errors in text or images and any
    necessary changes made to technical data. If you have any questions regarding
    technical problems please contact our Customer Services.
    Things to consider:
    Other wireless equipment using thesame frequency can reduce
    thetransmission range.
    The range of all wireless equipment depends on thetype of obstacles located
    between thetransmitter and thereceiver (e.g. aconcrete wall will interfere with
    thesignal more than aplasterboard wall).
    If you experience problems, try thefollowing:
    Turn off any other existing wireless equipment and check if this is thecause of
    theproblem.
    Reposition thewireless equipment, shorten thedistance between thesending
    and receiving devices or reduce thenumber of obstacles (walls, furniture, etc.)
    between them.
    What is aradio controlled clock?
    A radio controlled clock is anextremely accurate timekeeping device. The time is
    controlled by theatomic clock in Braunschweig, Germany (accuracy ±1 second per
    1 million years). The clock has abuilt -in radio receiver that decodes theincoming
    atomic clock signal (long wave 77.5 kHz). The product also has aprecisely
    calibrated quartz clock movement with afrequency of 32 kHz that keeps it running.
    The transmitter in Germany has anofficial range of 2,000 km. This means that
    theUK and Ireland should be well within range.
    Safety
    The alarm clock must only be repaired by qualified service technicians.
    The alarm clock is intended for indoor use only.
    Do not place thealarm clock where there is arisk of it falling into water or
    other liquid.
    Do not place thealarm clock in damp or dusty environments or where it could
    be subject to strong vibrations.
    Do not expose thealarm clock to extremely high or low temperatures. Do not
    expose theproduct to direct sunlight.
    Never try to open, change or modify thealarm clock in any way.
    Always remove thebatteries if thealarm clock is not to be used for along time.
    Buttons and functions
    3. [ ] Increases and sets values for
    date, time, alarm and activates
    backlight
    4. [ ] Decreases and sets values
    for date, time, alarm and activates
    backlight
    5. Battery holder
    4. Press [ Alarm on/off ] to turn thealarm on or off.
    5. When thealarm sounds, both theset alarm time and alarm icon will flash.
    6. Press [ Alarm on/off ] to turn thealarm off.
    7. If no button is pushed thealarm will automatically shut off after 2 minutes.
    12/24 hour time display
    Press [ ] to select either a12 or 24 hour clock display.
    Displaying seconds or day and language selection
    Press [ ] to select whether to display seconds or current day.
    Hold in [ ] for 3 seconds to select language from therolling display:
    “DE” (German), “FR” (French), “IT” (Italian), “SP” (Spanish), “DU” (Dutch),
    “SW” (Swedish) or “EN” (English). Release thebutton once thedesired
    language is shown.
    Dual time zone setting
    1. Hold in [ ] until “F” appears in thedisplay.
    2. Set the[ Date set, Time set, Alarm set — ] switch in the Time set position.
    3. Press [ ] or [ ] until thedesired time zone is displayed (-12 to +12 hours).
    4. Set the[ Date set, Time set, Alarm set — ] switch in the— position once all
    desired settings have been entered.
    5. Hold in [ ] to switch between local/normal time display and theother time zone.
    Snooze function
    Press [ ] or [ ] when thealarm sounds to activate thesnooze function.
    The alarm will pause and then sound again after 4 minutes.
    Display illumination
    Press [ ] or [ ] to turn on thebacklight. The backlight has a5-second duration
    and turns off automatically.
    Care and maintenance
    Clean theproduct using alightly moistened cloth. Only use mild cleaning agents,
    never solvents or corrosive chemicals.
    Troubleshooting guide
    The clock is not working. Check that thebatteries are not flat.
    Check for correct battery insertion.
    Disposal
    This product should be disposed of in accordance with local regulations.
    If you are unsure how to proceed, contact your local authority.
    Specifications
    Batteries 2×AAA/LR03
    Size 80×80×30 mm
    1. [ Alarm on/off ]
    2. [ Date set, Time set,
    Alarm set — ]
    Display symbols
    Time signal received
    Time signal scan
    PM (shown only for the12-hour clock display)
    Alarm
    Snooze
    Time zone
    British Summer Time (GMT+1)
    Low battery
    Operating instructions
    1. Open thebattery cover by sliding it downwards.
    2. Insert 2×AAA/LR03 batteries. Note thepolarity markings in thebattery
    compartment to ensure correct insertion.
    3. Once thebatteries have been inserted theclock will immediately begin
    scanning for thetime signal transmission
    4. If thetime signal is received, both time and date will automatically be set and
    thereceived time signal icon will appear.
    If no time signal is received, thesearch icon will stop flashing and no icon willap-
    pear. The time and date must also be set manually.
    Manually setting thedate
    1. Set the[ Date set, Time set, Alarm set — ] switch in the Date set position.
    2. Hold in [ ] or [ ] until thecorrect year appears. Release thebutton when
    thecorrect year is shown.
    3. Hold in [ ] or [ ] until thecorrect month appears. Release thebutton when
    thecorrect month is shown.
    4. Hold in [ ] or [ ] until thecorrect day appears. Release thebutton when
    thecorrect day is shown.
    Manually setting thetime
    1. Set the[ Date set, Time set, Alarm set — ] switch in the Time set position.
    2. Hold in [ ] or [ ] until thecorrect time appears.
    Setting thealarm
    1. Set the[ Date set, Time set, Alarm set — ] switch in the Alarm set position.
    2. Hold in [ ] or [ ] until thecorrect alarm time appears.
    3. Set the[ Date set, Time set, Alarm set — ] switch in the— position once all
    desired settings have been entered.
Clas Ohlson RC123

Aveți nevoie de ajutor?

Numărul de întrebări: 0

Aveți o întrebare despre Clas Ohlson RC123 sau aveți nevoie de ajutor? Puneți-vă întrebarea aici. Oferiți o descriere clară și cuprinzătoare a problemei și a întrebării dvs.. Cu cât oferiți mai multe detalii pentru problema și întrebarea dvs., cu atât va fi mai ușor pentru ceilalți proprietari Clas Ohlson RC123 să răspundă corect la întrebarea dvs..

Consultați aici manualul pentru Clas Ohlson RC123, gratuit. Acest manual se încadrează în categoria Radiouri cu ceas și a fost evaluat de 1 persoane cu o notă medie de 6. Acest manual este disponibil în următoarele limbi: Engleză, Germană, Suedeză, Norvegiană, Finlandeză. Aveți o întrebare despre Clas Ohlson RC123 sau aveți nevoie de ajutor? Puneți întrebarea aici

Specificații Clas Ohlson RC123

General
Brand Clas Ohlson
Model RC123
Produs Radio cu ceas
Limbă Engleză, Germană, Suedeză, Norvegiană, Finlandeză
Tipul fișierului PDF

Manualdeinstructiuni.ro

Cauți un manual? Manualdeinstructiuni.ro îți garantează că vei găsi manualul pe care îl cauți rapid. Baza noastră de date conține peste 1 milion de manuale PDF pentru mai mult de 10.000 de mărci. În fiecare zi, adăugăm cele mai noi manuale pentru ca tu să poți găsi mereu produsul pe care îl cauți. Este foarte simplu: doar introdu numele mărcii și tipul produsului în bara de căutare și poți vedea instantaneu manualul dorit online gratuit.

Manualdeinstructiuni.ro

© Copyright 2020 Manualdeinstructiuni.ro. Toate drepturile rezervate.